An instrument used to ii.Ce the airspeed on many early low-speed airplanes, principally during 1919 to 1930, was the tube. This simple device is a convergent-divergent duct. (The front section’s cross-sectional area A decreases in the flow direction, and the back section’s cross-sectional area increases in the flow direction. Somewhere between the inlet and exit of the duct, there is a minimum area called the throat.) See figure below. Let A1 andA2 denote the inlet and throat areas, respectively. Let p1 and p2 be the pressures at the inlet and throat, respectively. The tube is mounted at a specific location on the airplane (generally on the wing or near the front of the fuselage) where the inlet velocity V1 is essentially the same as the free-stream velocity- that is, the velocity of the airplane through the air. With a knowledge of the area ratio A:z/A1 (a fixed design feature) and a measurement of the pressure difference p1 – P2• we can determine the airplane’s velocity. For example, assume If the airplane is flying at standard sea level, what is its velocity?

PLACE THIS ORDER OR A SIMILAR ORDER WITH MY ONLINE PROFESSOR TODAY AND GET AN AMAZING DISCOUNT

The post assume If the airplane is flying at standard sea level, what is its velocity? appeared first on MY ONLINE PROFESSOR .

Do you need a similar assignment done for you from scratch? We have qualified writers to help you. We assure you an A+ quality paper that is free from plagiarism. Order now for an Amazing Discount!
Use Discount Code "Newclient" for a 15% Discount!

NB: We do not resell papers. Upon ordering, we do an original paper exclusively for you.