1. Create the flange model shown in Figure 2.32 . Also, create the drawing of the part. All dimensions are in inches. 2. Modify the flange model shown in Figure 2.32 as follows: a. Change the circular flange to a square flange. The length of the square side is equal to the diameter of the flange outside circle, i.e. 8.5 inch as shown in Section AA in Figure 2.32. b. Change the hub to be cylindrical instead of conical. Use the larger diameter of the current conical hub as the diameter for the new cylindrical hub. c. Use 8 holes as the current hub, spaced equally along the edges of the square. Create the drawing of the new square flange.
PLACE THIS ORDER OR A SIMILAR ORDER WITH MY ONLINE PROFESSOR TODAY AND GET AN AMAZING DISCOUNT
The post Create the drawing of the new square flange. appeared first on MY ONLINE PROFESSOR .